Rear Bumpers-FJ
Specifications:
Constructed from 1.5” & 1.25” .188 (3/16”) wall DOM Tubing
2 different 2” receiver options
4 Shackle mounting points
Secured to frame with ten 12mm grade 10.9 bolts (basically grade 8 in metric terms)
2 back up lights mounted between horizontal tubes
Accommodates OEM back up sensors
License plate mounts in the stock location
*Please note the Tire Swingout CANNOT be added at a later time*
Price of the Rear bumper $975.00
Here is a great installation thread:
http://www.fjcruiserforums.com/forums/toy-outfitters/81904-toy-outfitters-rear-bumper-install-no-swingout.html
Rear Tube Bumper with Tire Swingout
-Bumper weight 88 lbs
-Swing out weight 55 lbs without fuel can rack or ladder
-Choice of fuel can rack or ladder mounted to tabs on swing out. Either can be removed.
-4 shackle mounting points
-There are two options for 2" receivers. One will mount up to the bottom of the rear cross member like the OEM unit does and will be
welded in. The second will be a removable unit using the same 6 bolts that the OEM unit uses to mount. The difference is that the bolt in
model will gain you 4.2 degrees of departure angle over the weld on option.
-2 Auxiliary back up lights
-Provisions for mounting back up sensors (can be omitted if you do not want them)
-Locking pin that locks swing out at closed and fully open positions
-3,500 pound rated spindle
-Positive cam locking bolt latch
-1.5” & 1.25” .188” (3/16”) wall DOM tubing construction
-1/4” steel plate mounting points
-10 12mm grade 10.9 (equivalent to grade 8) mounting bolts secure bumper to frame
-Retains stock Tupperware behind rear tire and wraps around to rear door.
-Retains stock license plate location
Options:
Hi Lift mount
Shovel mount
Axe Mount
CO2 tank mount (mounts on tabs used for fuel can or ladder)
Specialty mounts (mounts on tabs used for fuel can or ladder)
The rear window does NOT open all the way as configured. I will try it with a spacer and post up the results.
Note that back up sensors are accommodated. Back up lights come with the bumper.
Price as listed $1725.00
*During testing this pictured rear bumper sustained direct hit to the passenger corner. The bumper came to rest on a 2'+ tall rock ledge holding the rear wheels of the vehicle completely off the ground. Upon further inspection the vehicle suffered absolutely no damage. The bumper showed only a minor scratch which was repaired with only readily available paint. *
This 4Runner rear bumper was custom crafted by TTO to fill all the requirements of the vehicle owner. Though similar to the FJ Cruiser bumper the tire swing out opens to the passenger side.
Courtesy of Matt from
1999 4Runner Crystal Black SR5 Sport with TTO rear bumper, swing out tire carrier and optional gas can rack
Call us at 828-692-1292
