Front Tube Bumper
The tube bumper shown is a 2” receiver bumper. This bumper was designed to take the abuse of hard trail use and to look good while doing it. This design allows you to mount a winch on a “Multi Mount” and use it on either the front or rear of the vehicle.
The winch can be carried in the rear of the vehicle and used when the need arises. It also allows the owner to leave the winch at home when not out wheeling, removing the extra overhanging weight and keeping the winch out of the elements.
Before After
The bumper mounts to the frame using the stock 4 bolt location on each side along with a perpendicular plate mounted back on the frame rails. Mounting plates are ¼” steel plate. The main upright tubes and upper HOZ tube are 1.5” .188 (3/16”) wall tubing. The balance of the tubing is 1.25” .188 (3/16”) wall tubing. The main cross bar between mounting plates is 1.5” X 2” .188 (3/16”) wall square tubing
Introductory price-$875.00 plus shipping
Custom Light Tabs - $10.00 per pair
Add Headlight Hoops $75.00
Much like our 2” receiver bumper, this bumper is constructed of ¼” plate steel at the mounting points and winch plate itself. The tubing is 1.5” & 1.25” .188” (3/16”) wall DOM tubing. There is also expanded steel on the front as seen and also up under the winch mount to keep sticks and stones away from the radiator. The bumper mounts to the front mounting plates on the frame and also back to the sides of the frame.
Price is $925.00 including including 2 light tabs
Call us at 864-590-0051
Courtesy of Bill of Schaumburg, IL
